Motor Cycles

(n.) = motor land vehicle

Ex. Other branches of engineering include: 629.1 Aerospace engineering,.2 motor land vehicles and cycles,.3 Air-cushion vehicles (Hovercraft), and.4 Astronautics.

* * *

SUBJECT AREA: Automotive engineering, Land transport

[br]

[br]

[br]

In 1884 Butler patented a design for a motor tricycle that was shown that year at the Stanley Cycle Show and in the following year at the Inventions Exhibition. In 1887 he patented his "Petrol-tricycle", which was built the following year. The cycle was steered through its two front wheels, while it was driven through its single rear wheel. The motor, which was directly connected to the rear wheel hub by means of overhung cranks, consisted of a pair of water-cooled 2 1/4 in. (57 mm) bore cylinders with an 8 in. (203 mm) stroke working on the Clerk two-stroke cycle. Ignition was by electric spark produced by a wiper breaking contact with the piston, adopted from Butler's own design of electrostatic ignition machine; this was later replaced by a Ruhmkorff coil and a battery. There was insufficient power with direct drive and the low engine speed of c.100 rpm, producing a road speed of approximately 12 mph (19 km/h), so Butler redesigned the engine with a 6 3/4 in. (171 mm) stroke and a four-stroke cycle with an epicyclic reduction gear drive of 4:1 and later 6:1 ratio which could run at 600 rpm. The combination of restrictive speed-limit laws and shortsightedness of his backers prevented development, despite successful road demonstrations. Interest was non-existent by 1895, and the following year this first English internal combustion engined motorcycle was broken up for the scrap value of some 163 lb (74 kg) of copper and brass contained in its structure.

[br]

SUBJECT AREA: Aerospace

[br]

[br]

[br]

Son of a successful mining engineer, Sopwith did not shine at school and, having been turned down by the Royal Navy as a result, attended an engineering college. His first interest was motor cars and, while still in his teens, he set up a business in London with a friend in order to sell them; he also took part in races and rallies.

Sopwith's interest in aviation came initially through ballooning, and in 1906 he purchased his own balloon. Four years later, inspired by the recent flights across the Channel to France and after a joy-ride at Brooklands, he bought an Avis monoplane, followed by a larger biplane, and taught himself to fly. He was awarded the Royal Aero Society's Aviator Certificate No. 31 on 21 November 1910, and he quickly distinguished himself in flying competitions on both sides of the Atlantic and started his own flying school. In his races he was ably supported by his friend Fred Sigrist, a former motor engineer. Among the people Sopwith taught to fly were an Australian, Harry Hawker, and Major Hugh Trenchard, who later became the "father" of the RAF.

In 1912, depressed by the poor quality of the aircraft on trial for the British Army, Sopwith, in conjunction with Hawker and Sigrist, bought a skating rink in Kingston-upon-Thames and, assisted by Fred Sigrist, started to design and build his first aircraft, the Sopwith Hybrid. He sold this to the Royal Navy in 1913, and the following year his aviation manufacturing company became the Sopwith Aviation Company Ltd. That year a seaplane version of his Sopwith Tabloid won the Schneider Trophy in the second running of this speed competition. During 1914–18, Sopwith concentrated on producing fighters (or "scouts" as they were then called), with the Pup, the Camel, the 1½ Strutter, the Snipe and the Sopwith Triplane proving among the best in the war. He also pioneered several ideas to make flying easier for the pilot, and in 1915 he patented his adjustable tailplane and his 1 ½ Strutter was the first aircraft to be fitted with air brakes. During the four years of the First World War, Sopwith Aviation designed thirty-two different aircraft types and produced over 16,000 aircraft.

The end of the First World War brought recession to the aircraft industry and in 1920 Sopwith, like many others, put his company into receivership; none the less, he immediately launched a new, smaller company with Hawker, Sigrist and V.W.Eyre, which they called the H.G. Hawker Engineering Company Ltd to avoid any confusion with the former company. He began by producing cars and motor cycles under licence, but was determined to resume aircraft production. He suffered an early blow with the death of Hawker in an air crash in 1921, but soon began supplying aircraft to the Royal Air Force again. In this he was much helped by taking on a new designer, Sydney Camm, in 1923, and during the next decade they produced a number of military aircraft types, of which the Hart light bomber and the Fury fighter, the first to exceed 200 mph (322 km/h), were the best known. In the mid-1930s Sopwith began to build a large aviation empire, acquiring first the Gloster Aircraft Company and then, in quick succession, Armstrong-Whitworth, Armstrong-Siddeley Motors Ltd and its aero-engine counterpart, and A.V.Roe, which produced Avro aircraft. Under the umbrella of the Hawker Siddeley Aircraft Company (set up in 1935) these companies produced a series of outstanding aircraft, ranging from the Hawker Hurricane, through the Avro Lancaster to the Gloster Meteor, Britain's first in-service jet aircraft, and the Hawker Typhoon, Tempest and Hunter. When Sopwith retired as Chairman of the Hawker Siddeley Group in 1963 at the age of 75, a prototype jump-jet (the P-1127) was being tested, later to become the Harrier, a for cry from the fragile biplanes of 1910.

Sopwith also had a passion for yachting and came close to wresting the America's Cup from the USA in 1934 when sailing his yacht Endeavour, which incorporated a number of features years ahead of their time; his greatest regret was that he failed in his attempts to win this famous yachting trophy for Britain. After his retirement as Chairman of the Hawker Siddeley Group, he remained on the Board until 1978. The British aviation industry had been nationalized in April 1977, and Hawker Siddeley's aircraft interests merged with the British Aircraft Corporation to become British Aerospace (BAe). Nevertheless, by then the Group had built up a wide range of companies in the field of mechanical and electrical engineering, and its board conferred on Sopwith the title Founder and Life President.

[br]

CM / JDS

SUBJECT AREA: Automotive engineering, Steam and internal combustion engines

[br]

[br]

[br]

Clerk began his engineering training at about the age of 15 in the drawing office of H.O.Robinson \& Company, Glasgow, and in his father's works. Meanwhile, he studied at the West of Scotland Technical College and then, from 1871 to 1876, at Anderson's College, Glasgow, and at the Yorkshire College of Science, Leeds. Here he worked under and then became assistant to the distinguished chemist T.E.Thorpe, who set him to work on the fractional distillation of petroleum, which was to be useful to him in his later work. At that time he had intended to become a chemical engineer, but seeing a Lenoir gas engine at work, after his return to Glasgow, turned his main interest to gas and other internal combustion engines. He pursued his investigations first at Thomson, Sterne \& Company (1877–85) and then at Tangyes of Birmingham (1886–88. In 1888 he began a lifelong partnership in Marks and Clerk, consulting engineers and patent agents, in London.

Beginning his work on gas engines in 1876, he achieved two patents in the two following years. In 1878 he made his principal invention, patented in 1881, of an engine working on the two-stroke cycle, in which the piston is powered during each revolution of the crankshaft, instead of alternate revolutions as in the Otto four-stroke cycle. In this engine, Clerk introduced supercharging, or increasing the pressure of the air intake. Many engines of the Clerk type were made but their popularity waned after the patent for the Otto engine expired in 1890. Interest was later revived, particularly for application to large gas engines, but Clerk's engine eventually came into its own where simple, low-power motors are needed, such as in motor cycles or motor mowers.

Clerk's work on the theory and design of gas engines bore fruit in the book The Gas Engine (1886), republished with an extended text in 1909 as The Gas, Petrol and Oil Engine; these and a number of papers in scientific journals won him international renown. During and after the First World War, Clerk widened the scope of his interests and served, often as chairman, on many bodies in the field of science and industry.

[br]

1. get* across; ( препятствие) get* over; (вн., через) cross (d.), get* (over)

2. (к) pass on (to); (без доп.; менять место, занятие и т. п.) pass

3. (в вн.; превращаться) turn (into)

4.:

SUBJECT AREA: Agricultural and food technology, Land transport

[br]

[br]

[br]

The son of a market gardener, Albone's interest lay in mechanics, and by 1880 he had established his own business as a cycle maker and repairer. His inventive mind led to a number of patents relating to bicycle design, but his commercial success was particularly assisted by his achievements in cycle racing. From this early start he diversified his business, designing and supplying, amongst other things, axle bearings for the Great Northern Railway, and also building motor cycles and several cars. It is possible that he began working on tractors as early as 1896. Certainly by 1902 he had built his first prototype, to the three-wheeled design that was to remain in later production models. Weighing only 30 cwt, yet capable of pulling two binders or a two-furrow plough, Albone's Ivel tractor was ahead of anything in its time, and its power-to-weight ratio was to be unrivalled for almost a decade. Albone's commercial success was not entirely due to the mechanical tractor's superiority, but owed a considerable amount to his ability as a showman and demonstrator. He held two working demonstrations a month in the village of Biggleswade in Bedfordshire, where the tractors were made. The tractor was named after the river Ivel, which flowed through the village. The Ivel tractor gained twenty-six gold and silver medals at agricultural shows between 1902 and 1906, and was a significant contributor to Britain's position as the world's largest exporter of tractors between 1904 and 1914. Albone tried other forms of his tractor to increase its sales. He built a fire engine, and also an armoured vehicle, but failed to impress the War Office with its potential.

Albone died at the age of 46. His tractor continued in production but remained essentially unimproved, and the company finally lost its sales to other designs, particularly those of American origin.

[br]

SUBJECT AREA: Aerospace

[br]

[br]

[br]

Flying kites as a boy aroused Ellehammer's interest in aeronautics, and he developed a kite that could lift him off the ground. After completing an apprenticeship, he started his own manufacturing business, whose products included motor cycles. He experimented with model aircraft as a sideline and used his mo tor-cycle experience to build an aero engine during 1903–4. It had three cylinders radiating from the crankshaft, making it, in all probability, the world's first air-cooled radial engine. Ellehammer built his first full-size aircraft in 1905 and tested it in January 1906. It ran round a circular track, was tethered to a central mast and was unmanned. A more powerful engine was needed, and by September Ellehammer had improved his engine so that it was capable of lifting him for a tethered flight. In 1907 Ellehammer produced a new five-cylinder radial engine and installed it in the first manned tri-plane, which made a number of free-flight hops. Various wing designs were tested and during 1908–9 Ellehammer developed yet another radial engine, which had six cylinders arranged in two rows of three. Ellehammer's engines had a very good power-to-weight ratio, but his aircraft designs lacked an understanding of control; consequently, he never progressed beyond short hops in a straight line. In 1912 he built a helicopter with contra-rotating rotors that was a limited success. Ellehammer turned his attention to his other interests, but if he had concentrated on his excellent engines he might have become a major aero engine manufacturer.

[br]

SUBJECT AREA: Aerospace, Weapons and armour

[br]

[br]

[br]

The son of a coppersmith, as a young man Ernst Heinkel was much affected by seeing the Zeppelin LZ 4 crash and burn out at Echterdringen, near Stuttgart. After studying engineering, in 1910 he designed his first aeroplane, but it crashed; he was more successful the following year when he made a flight in it, with an engine on hire from the Daimler company. After a period working for a firm near Munich and for LVG at Johannisthal, near Berlin, he moved to the Albatros Company of Berlin with a monthly salary of 425 marks. In May 1913 he moved to Lake Constance to work on the design of sea-planes and in May 1914 he moved again, this time to the Brandenburg Company, where he remained as a designer until 1922, when he founded his own company, Ernst Heinkel Flugzeugwerke. Following the First World War, German companies were not allowed to build military aircraft, which was frustrating for Heinkel whose main interest was high-speed aircraft. His sleek He 70 airliner, built for Lufthansa, was designed to carry four passengers at high speeds: indeed it broke many records in 1933. Lufthansa decided it needed a larger version capable of carrying ten passengers, so Heinkel produced his most famous aeroplane, the He 111. Although it was designed as a twin-engined airliner on the surface, secretly Heinkel was producing a bomber. The airliner version first flew on Lufthansa routes in 1936, and by 1939 almost 1,000 bombers were in service with the Luftwaffe. A larger four-engined bomber, the He 177, ran into development problems and it did not see service until late in the Second World War. Heinkel's quest for speed led to the He 176 rocket-powered research aeroplane which flew on 20 June 1939, but Hitler and Goering were not impressed. The He 178, with Dr Hans von Ohain's jet engine, made its historic first flight a few weeks later on 27 August 1939; this was almost two years before the maiden flight in Britain of the Gloster E 28/39, powered by Whittle's jet engine. This project was a private venture by Heinkel and was carried out in great secrecy, so the world's first jet aircraft went almost unnoticed. Heinkel's jet fighters, the He 280 and the He 162, were never fully operational. After the war, Heinkel in 1950 set up a new company which made bicycles, motor cycles and "bubble" cars.

[br]

JDS / IMcN

(n.) = aerospace engineering

Ex. Other branches of engineering include: 629.1 aerospace engineering,.2 Motor land vehicles and cycles,.3 Air-cushion vehicles (Hovercraft), and.4 Astronautics.

* * *

(n.) = air-cushion vehicle

Ex. Other branches of engineering include: 629.1 Aerospace engineering,.2 Motor land vehicles and cycles,.3 air-cushion vehicles (Hovercraft), and.4 Astronautics.

* * *

(n.) = cycle

Ex. Other branches of engineering include: 629.1 Aerospace engineering,.2 Motor land vehicles and cycles,.3 Air-cushion vehicles (Hovercraft), and.4 Astronautics.

* * *

SUBJECT AREA: Automotive engineering, Land transport

[br]

[br]

[br]

Morris was the son of Frederick Morris, then a draper. He was the eldest of a family of seven, all of whom, except for one sister, died in childhood. When he was 3 years old, his father moved to Cowley, near Oxford, where he attended the village school. After a short time with a local bicycle firm he set up on his own at the age of 16 with a capital of £4. He manufactured pedal cycles and by 1902 he had designed a motor cycle and was doing car-repair work. By 1912, at the Motor Show, he was able to announce his first car, the 8.9 hp, two-seater Morris Oxford with its characteristic "bull-nose". It could perform at up to 50 mph (80 km/h) and 50 mpg (5.65 1/100 km). It cost £165.

Though untrained, Morris was a born engineer as well as a natural judge of character. This enabled him to build up a reliable team of assistants in his growing business, with an order for four hundred cars at the Motor Show in 1912. Much of his business was built up in the assembly of components manufactured by outside suppliers. In he moved out of his initial premises by New College in Longwall and bought land at Cowley, where he brought out his second model, the 11.9hp Morris Oxford. This was after the First World War, during which car production was reduced to allow the manufacture of tanks and munitions. He was awarded the OBE in 1917 for his war work. Morris Motors Ltd was incorporated in 1919, and within fifteen months sales of cars had reached over 3,000 a year. By 1923 he was producing 20,000 cars a year, and in 1926 50,000, equivalent to about one-third of Britain's output. With the slump, a substantial overdraft, and a large stock of unsold cars, Morris took the bold decision to cut the prices of cars in stock, which then sold out within three weeks. Other makers followed suit, but Morris was ahead of them.

Morris was part-founder of the Pressed Steel Company, set up to produce car bodies at Cowley. A clever operation with the shareholding of the Morris Motors Company allowed Morris a substantial overall profit to provide expansion capital. By 1931 his "empire" comprised, in addition to Morris Motors, the MG Car Company, the Wolseley Company, the SU Carburettor Company and Morris Commercial Cars. In 1936, the value of Morris's financial interest in the business was put at some £16 million.

William Morris was a frugal man and uncomplicated, having little use for all the money he made except to channel it to charitable purposes. It is said that in all he gave away some £30 million during his lifetime, much of it invested by the recipients to provide long-term benefits. He married Elizabeth Anstey in 1904 and lived for thirty years at Nuffield Place. He lived modestly, and even after retirement, when Honorary President of the British Motor Corporation, the result of a merger between Morris Motors and the Austin Motor Company, he drove himself to work in a modest 10 hp Wolseley. His generosity benefited many hospitals in London, Oxford, Birmingham and elsewhere. Oxford Colleges were another class of beneficiary from his largesse.

[br]